HP StorageWorks M2402, User Manual

Page: 34 / 282

Installation
16 Network Storage Router M2402 User Guide
Selecting a Location
The router can be placed on a desktop or mounted in a standard 19-inch rack.
When considering a location for the router, make sure the airflow area
surrounding the front and the back of the router is unobstructed.
Unpacking the Box
Unpack the router as follows:
1. Remove all items from the shipping container. Check each one for damage.
Keep the router in the protective bag until ready to install.
2. Refer to the packing slip or contents list to make sure all the equipment was
received. If an item is missing, contact your sales representative immediately.
Mounting the Router on a Desktop
1. Remove the router from the protective bag.
Caution: Place the router onto a smooth surface away from any potential
exposure to direct sunlight, liquids or vapors, excessive heat, or risk of
accidental dropping or other damage.
2. Attach the stick-on feet to the bottom four corners of the unit.
3. Place the router on the table or desktop, ensuring the intake and exhaust vents
are clear of obstructions.
Installing the Router in a Rack
The following items in the router kit are used to rack-mount the router:
■
Mounting rails
■
Extender brackets
■
Bag of mounting hardware (8 #M6x12 Phillips screws, 4 #6-32x.312 Phillips
screws)
■
Bezel blank