manualshive.com logo in svg

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM, User Manual

Share
Download
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual Download Page 69

3.

When you are done, click 

Next

 to open the Storage Allocation page (see

“

Allocating space for components

” on page 69).

NOTE:

The number of slots needed for your virtual library will depend on the media rotation type
chosen for the backups that will use the virtual library. The number of slots must be high
enough to support the rotation type you intend to use for scheduling backups to this virtual
library. See 

Planning for Media Rotation in the

Data Protector Express User's Guide and Technical Reference for more information.

Allocating space for components

Use the 

Storage Allocation

 page in the wizards to specify the allocated space size and advanced

configuration settings for each application component or shared folder listed. Default values are
provided.

NOTE:

15 MB is the minimum value that can be allocated. You cannot set the size below the minimum value.

NOTE:

SQL Server and Exchange default advanced configuration settings are based on SQL Server, Exchange,
and HP storage best practices, and should generally not be changed.

All-in-One Storage System 

69

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands