HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual Download Page 107

Page: 107 / 204

Storage tab

—Displays the unallocated space, used space, free space on the volume, and also details

on your volume or logical disk properties, depending on the application open:

Table 40 Storage tab: HP All-in-One Storage System logical disk properties

Value

Property

Name the system uses to identify the logical disk.

System Name

Globally unique identifier(s) of the hard drive(s) used by the logical disk
for storage.

Physical Disks

Indicates if the logical disk is configured with exclusive storage. See

Table

on page 72 for more information.

Exclusive Storage

The RAID level to which the logical disk is configured. See

Customizing

RAID levels

on page 73 for more information.

RAID Level

The RAID stripe size to which the logical disk is configured. See

Table

on page 72 for more information.

RAID Stripe Size

Speeds up reads when enabled. This setting is determined by the storage
array, not ASM.

Read Cache

Speeds up writes when enabled. This setting is determined by the storage
array, not ASM.

Write Cache

The number of hot spares with which the logical disk is configured. See

Table 19

on page 72 for more information.

Number of Hot Spares

Space on the logical disk used to store data that is not managed by ASM.

Unmanaged Data

Unused storage space on the logical disk that is not allocated.

Free Space

Table 41 Storage tab: HP All-in-One Storage System volume properties

Value

Property

Name of your HP All-in-One Storage System.

Storage Server Host Name

Name of the volume on your HP All-in-One Storage System.

Storage Server Volume - Name

Status of the volume on your HP All-in-One Storage System.

Storage Server Volume - Status

Indicates if volume is configured with exclusive storage. See

Table

on page 72 for more information.

Storage Server Volume - Exclusive
Storage

The RAID level to which the volume is configured. See

Customizing RAID

levels

on page 73 for more information.

Storage Server Volume - RAID
Level

The RAID stripe size to which the volume is configured. See

Table

on page 72 for more information.

Storage Server Volume - RAID
Stripe Size

Speeds up reads when enabled. This setting is determined by the storage
array, not ASM.

Storage Server Volume - Read
Cache

Speeds up writes when enabled. This setting is determined by the storage
array, not ASM.

Storage Server Volume - Write
Cache

The number of hot spares with which the shared folder's storage is
configured. See

Table 19

on page 72 for more information.

Storage Server Volume - Number
of Hot Spares

All-in-One Storage System

107

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM













































































































































































































Search results

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Reviews:

Brands by name

Popular brands

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM, User Manual

Search results

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Reviews:

Brands by name

Popular brands