manualshive.com logo in svg

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM, User Manual

Share
Download
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual Download Page 43

Status

Description

Item

Off = Not linked to network

Green or flashing = Network activity

10/100/1000 NIC activity LED

17

Off = No network activity

Green = Linked to network

10/100/1000 NIC link LED

18

Off = Not linked to network

SAS and SATA hard drive LEDs

The following figure shows SAS/SATA hard drive LEDs. These LEDs are located on all HP All-in-One
hot plug hard drives.

Figure 9 SAS/SATA hard drive LEDs

Table 13 SAS and SATA hard drive LED combinations

Status

2. Online/activity LED
(green)

1. Fault/UID LED
(amber/blue)

The drive has failed, or a predictive failure alert has
been received for this drive; it also has been selected
by a management application.

On, off, or flashing

Alternating amber and blue

The drive is operating normally, and it has been
selected by a management application.

On, off, or flashing

Steadily blue

A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.

On

Amber, flashing regularly (1
Hz)

The drive is online, but it is not active currently.

On

Off

Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.

Flashing regularly (1 Hz)

Amber, flashing regularly (1
Hz)

The drive is part of an array that is undergoing
capacity expansion or stripe migration, but a
predictive failure alert has been received for this

All-in-One Storage System 

43

Summary of Contents for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands