HP StorageWorks 1/16 Tape SuperLoader, Manual, Page: 75 / 146

SuperLoader Operation
61 1/16 Tape SuperLoader Reference Guide
Loading and Unloading Cartridges
The magazine must be fully removed to load and unload cartridges.
There are two handles located on both ends of the magazine. Move the slots
within the magazine by using these two handles. Use the two openings along the
top of the magazine and the four openings along the bottom of the magazine to
load and unload cartridges from the eight slots within each magazine.
To load a cartridge into the magazine:
1. Center a slot within one of the six openings on the side of the magazine.
2. Properly orient the cartridge.
Note: There is a keying feature in each slot that only lets you fully insert the cartridge
one way.
3. Fully insert the cartridge into the slot. When pushing the cartridge into the slot
you will feel slight resistance until the cartridge is properly seated into the
slot.
Figure 50: Inserting a cartridge
To remove a cartridge, use the handles to center the desired slot in the openings on
the side of the magazine. Use your thumb and index finger to pull out the
cartridge. You will feel slight resistance when removing the cartridge.
1
2