HP StorageWorks 1/16 Tape SuperLoader, Manual, Page: 46 / 146

Installation and Configuration
32 1/16 Tape SuperLoader Reference Guide
10. Press Enter.
The Configuration submenu reappears and the permanent IP is now in effect.
You do not need to reboot the SuperLoader.
11. Press Escape or Enter to return to the Ethernet submenu.
Subnet Mask
Creating a subnet mask is a method to split IP networks into a series of subgroups,
or subnets, to improve performance and security.
To set a subnet mask:
1. On the main menu, scroll to Configuration. (See Figure 22.)
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See Figure 23.)
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Subnet Mask. (See Figure 24.)
6. Press Enter.
7. At each position of the mask address, scroll to the correct number and press
Enter to advance your cursor.
Figure 26: Setting the Subnet Mask
Note: Use the Escape key to backspace to a previous text box, if necessary.
When you have set the mask, the SuperLoader displays Enter to save.
8. Press Enter.
SUB addr changed to appears on the LCD. You do not need to reboot the
SuperLoader.
9. Press Escape or Enter to return to the Ethernet submenu.
Subnet Mask:
255.255.195.000