HP StorageWorks 1/16 Tape SuperLoader, Manual, Page: 45 / 146

Installation and Configuration
31 1/16 Tape SuperLoader Reference Guide
7. Scroll to Dynamic (DHCP).
Figure 25: Set Dynamic IP
8. Press Enter.
9. Reboot to change the IP address.
a. Press and hold the power button on the front panel until Power Off
appears on the LCD.
b. Press the power button again to power on the SuperLoader.
The IP address is changed.
To set a permanent IP address:
1. On the main menu, scroll to Configuration. (See Figure 22.)
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See Figure 23.)
4. Press Enter.
5. On the Ethernet submenu, scroll to Set IP. (See Figure 24.)
6. Press Enter.
7. Scroll to Static IP. (See Figure 25.)
8. Press Enter.
9. At each position of the IP address, scroll to the correct number and press Enter
to advance your cursor.
Note: Use the Escape key to backspace to a previous text box, if necessary.
When you have set the IP address, the SuperLoader displays Enter to save.
Dynamic
Static IP
3
016.117.076.045