manualshive.com logo in svg

HP StorageWorks 1/16 Tape SuperLoader, Manual, Page: 107 / 146

Share
Download
HP StorageWorks 1/16 Tape SuperLoader Manual Download Page 107

Tape Drive Cleaning

93

1/16 Tape SuperLoader Reference Guide

■

If backup software cleaning function is enabled, the software can move the 
cleaning tape from the magazine slot to the tape drive and, after the cleaning 
cycle, return it to its slot (for more information, see your backup software’s 
documentation).

To store the cleaning tape:

1. After you have inserted the tape through the mailslot, on the main menu, 

scroll to Configuration.

2. Press Enter.

The Configuration submenu appears.

3. On the submenu, scroll to Cleaning Tape Location.

4. Press Enter.

5. Log in as Administrator.

A map of all the magazine slots appears.

Note:  

When a map of the magazine slots appears on the display, an asterisk (*) 

indicates a slot occupied by a data cartridge, and an exclamation point (!) indicates a 

slot occupied by a cleaning cartridge.

Figure 80:  Magazine slot map

6. Scroll to the slot where you want to store the cleaning tape.

Note:  

If you store the cleaning tape, you must specify in which slot the tape is to be 

stored.

7. Press Enter.

The SuperLoader moves the tape to its new location.

 

Slot 1 

Slot 2* 

Slot 3* 

Slot 4* 

Slot 5 

Slot 9 

Slot 13* 

Slot 6 

Slot 10* 

Slot 14* 

Slot 7* 

Slot 11* 

Slot 15* 

Slot 8* 

Slot 12* 

Slot 16* 

Summary of Contents for StorageWorks 1/16 Tape SuperLoader



















































































































































Reviews:

No comments