NOTE:
Enabling the RAID option in RBSU is only necessary for installation of the RAID d
If this option is not enabled, the OS loads the standard ATA driver from the OS media.
river.
2.
During POST, press the
F10
key to launch RBSU. If you fail to press
F10
before POST, you will need
onfiguration
.
4.
Set the
Configure Controller 1
field to
RAID
.
the changes and close RBSU. The server automatically reboots.
Creat
From the Option menu, select
Array Configuration Utility
.
rompts a selection of
to restart the server.
3.
In the Advanced menu screen, select
Hard Disk C
5.
Press
F10,
then select
Yes
to save
6.
Create a RAID volume.
ing a RAID volume
1.
Enable SATA RAID functionality in RBSU ("
Enabling the SATA RAID feature in RBSU
" on page
35
).
2.
After the system reboots, press
F8
to activate the RAID Configuration Utility.
3.
4.
Verify that two SATA drives are installed.
5.
In the Main menu screen, select
Create Array
from the main menu. The system p
RAID 0, RAID 1, or RAID 10.
6.
Select a RAID level.
CAUTION:
Back up any data stored on the hard drives before proceeding. The configuration
process erases all data on the hard drives.
7.
existing data on the hard
driv
drive capacity.
8.
For more
ded SATA RAID Controller
G_en
Press
Esc
. The system automatically configures the RAID level, erasing all
es. This process can take up to 50 minutes, depending on
After configuration is complete, press
Esc
to exit the utility.
information on configuring the SATA RAID feature, see the HP Embed
User Guide on the HP website (
http://www.hp.com/support/E_SATA_RAID_C_U
).
Required hardware
drive , LO
ers do not ship with these drives as standard hardware.
Diske
thorized reseller.
t HP authorized reseller:
•
•
com
Installing the Embedded SATA RAID driver requires a diskette drive or a CD-ROM drive.
In a Microsoft® Windows® OS environment, driver installation is supported only with a USB diskette
100i Virtual Floppy, or Virtual Floppy with the embedded SATA RAID Windows® driver.
Some serv
tte and CD-ROM drive options
To acquire a diskette drive option or CD-ROM drive option for a server, contact an HP au
For the name of the neares
In the United States, call 1-800-345-1518.
In Canada, call 1-800-263-5868.
•
In other locations, refer to the HP website (
http://www.hp.
).
Software and configuration utilities 36
Summary of Contents for ProLiant ML100 Series
Page 96: ...Technical support 96 ...
Page 97: ...Technical support 97 ...
