Operations 27
3.
Install the server into the rack.
4.
Power up the server (on page
22
).
Remove the air baffle
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
Power down the server (on page
22
).
2.
Extend or remove the server from the rack ("
Extend the server from the rack
" on page
22
).
3.
Remove the access panel (on page
23
).
4.
Remove the PCI riser cage (on page
26
).
CAUTION:
Do not detach the cable that connects the battery pack to the cache module.
Detaching the cable causes any unsaved data in the cache module to be lost.
5.
Remove the battery pack from the air baffle.
6.
Remove the air baffle.
Summary of Contents for ProLiant DL380 G6 Server
