HP ProLiant DL380 G5 DPSS Maintenance And Service Manual Download Page 78 | Manualshive

Page: 78 / 104

background image

Diagnostic tools 78

HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and

other related data needed for effective server management. Available in Microsoft® Windows® and
Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, refer to the HP website

(

http://www.hp.com/servers/diags

).

HP Insight Diagnostics survey functionality

HP Insight Diagnostics (on page

77

) provides survey functionality that gathers critical hardware and

software information on ProLiant servers.
This functionality supports operating systems that may not be supported by the server. For operating

systems supported by the server, see the HP website (

http://www.hp.com/go/supportos

).

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every SmartStart-assisted HP Insight Diagnostics installation, or it can

be installed through the HP PSP.

NOTE:

The current version of SmartStart provides the memory spare part numbers for the

server. To download the latest version, see the HP website (

http://www.hp.com/support

).

Integrated Management Log

The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each

event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:

•

From within HP SIM

•

From within Survey Utility

•

From within operating system-specific IML viewers

o

For NetWare: IML Viewer

o

For Windows®: IML Viewer

o

For Linux: IML Viewer Application

•

From within the iLO2 user interface

•

From within HP Insight Diagnostics (on page

77

)

For more information, see the Management CD in the HP Insight Foundation suite for ProLiant.

Array Diagnostic Utility

The HP Array Diagnostics Utility is a web-based application that creates a report of all HP storage

controllers and disk drives. This report provides vital information to assist in identifying faults or conditions

that may require attention. ADU can be accessed from the SmartStart CD or downloaded from the HP

website (

http://www.hp.com

).

«
...
76
77
78
79
80
...
»

Summary of Contents for ProLiant DL380 G5 DPSS









































































































Reviews:

No comments

Related manuals for ProLiant DL380 G5 DPSS

ML-2010 - B/W Laser Printer

Brand: Samsung Pages: 25

3CR860-95 - OfficeConnect Secure Router

Brand: 3Com Pages: 2

Brand: XAVI Technologies Corp. Pages: 71

Brand: Patton electronics Pages: 65

RUGGEDSWITCH RS900G

Brand: RuggedCom Pages: 23

RX343-S BLK/SLV

Brand: Rosewill Pages: 2

Brand: Techroutes Pages: 20

Brand: FOR-A Pages: 2

Brand: Quantum Pages: 345

McDATA Eclipse 1620

Brand: Sun Microsystems Pages: 9

xPort Pro XPP1004000-02R

Brand: Lantronix Pages: 17

Brand: Rocstor Pages: 132

Brand: Seagate Pages: 27

FusionServer 2288 V5

Brand: xFusion Digital Technologies Pages: 86

SUPERSERVER 1018D-73MTF

Brand: Supero Pages: 124

Brand: NetComm Pages: 2

Brand: Cambium Networks Pages: 172

CFexpress CFX-B Series

Brand: Wise Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands