Removal and replacement procedures 44
8.
Remove the processor fan bracket plate.
To replace the component, reverse the removal procedure.
Media drive ejector assembly
To remove the component:
1.
Power down the server (on page
30
).
2.
Extend or remove the server from the rack ("
Remove the server from the rack
" on page
31
).
3.
Remove the access panel ("
Access panel
" on page
32
).
4.
Remove the media drive ("
Media drive or blank
" on page
37
).
5.
Remove the processor fan bracket ("
Processor fan bracket
" on page
39
).
6.
Remove the fan board ("
Fan board
" on page
42
).
7.
Remove the processor fan bracket plate ("
Processor fan bracket plate
" on page
43
).
Summary of Contents for ProLiant DL380 G5 DPSS
