Removal and replacement procedures 63
4.
Remove the expansion slot cover.
To replace the component, reverse the removal procedure.
Expansion slot covers (3, 4, and 5)
CAUTION:
To prevent damage to the server or expansion boards, power down the server
and remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all PCI slots have either an expansion slot cover or an expansion board installed.
1.
Power down the server (on page
30
).
2.
Extend or remove the server from the rack ("
Remove the server from the rack
" on page
31
).
3.
Remove the access panel ("
Access panel
" on page
32
).
4.
Remove the PCI riser cage ("
PCI riser cage
" on page
62
).
5.
Remove the expansion slot cover.
Summary of Contents for ProLiant DL380 G5 DPSS
