Removal and replacement procedures 61
5.
Remove the hard drive backplane.
To replace the component, reverse the removal procedure.
Hard drive backplane retainer
To remove the component:
1.
Power down the server (on page
30
).
2.
Extend or remove the server from the rack ("
Remove the server from the rack
" on page
31
).
3.
Remove the access panel ("
Access panel
" on page
32
).
4.
Remove all hot-plug hard drives ("
Hot-plug SAS hard drive
" on page
33
).
5.
Remove the hard drive backplane ("
Hard drive backplane
" on page
60
).
6.
Remove the hard drive backplane retainer.
To replace the component, reverse the removal procedure.
Summary of Contents for ProLiant DL380 G5 DPSS
