118
HP ProLiant DL380 Generation 3 Server User Guide
Configuring Online Spare Memory
To configure online spare memory:
1. Install the required DIMMs ("Memory Options" on page 69).
2. Access RBSU by pressing the
F9
key during powerup when the prompt is
displayed in the lower right corner of the screen.
3. Select
System Options
.
4. Select
Advanced Memory Protection
.
5. Select
Online Spare with Advanced ECC Support
.
6. Press
the
Enter
key.
7. Press
the
Esc
key to exit the current menu or press the
F10
key to exit
RBSU.
For more information on online spare memory, refer to the white paper on the HP
website
(
http://www.compaq.com/support/techpubs/whitepapers/tm010301wp.html
).
Re-Entering the Server Serial Number
After you replace the system board or clear NVRAM, you must re-enter the
server serial number.
1. During the server startup sequence, press the
F9
key to access RBSU.
2. Select
the
System Options
menu.
3. Select
Serial Number
. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
4. Press
the
Enter
key to clear the warning.
5. Enter the serial number and press the
Enter
key.
6. Press
the
Escape
key to close the menu.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM
Summary of Contents for ProLiant DL380 G3
