HP ProCurve 6108, Management And Configuration Manual

Page: 265 / 547

Port-Based Virtual LANs (VLANs) and GVRP
Port-Based Virtual LANs (Static VLANs)
Example of a New
VLAN and ID
Figure 12-8. Example of VLAN Names Screen with a New VLAN Added
6. Repeat steps 2 through 5 to add more VLANs.
Remember that you can add VLANs until you reach the number specified
in the
Maximum VLANs to support field on the VLAN Support screen (see
figure 12-5 on page 12-10). This includes any VLANs added dynamically
due to GVRP operation.
7. Return to the VLAN Menu to assign ports to the new VLAN(s) as described
in the next section, “Adding or Changing a VLAN Port Assignment”.
Adding or Changing a VLAN Port Assignment
Use this procedure to add ports to a VLAN or to change the VLAN assign­
ment(s) for any port. (Ports not specifically assigned to a VLAN are automat­
ically in the default VLAN.)
1. From the Main Menu select:
2. Switch Configuration
8. VLAN Menu . . .
3. VLAN Port Assignment
You will then see a VLAN Port Assignment screen similar to the following:
12-13