HP ProCurve 6108, Management And Configuration Manual

Page: 180 / 547

Optimizing Traffic Flow with Port Controls, Port Trunking, and Port-Based Priority
Viewing Port Status and Configuring Port Parameters
Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured
2. Press
[E]
(for Edit ). The cursor moves to the Enabled field for the first port.
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter]
, then press
[S]
(for
Save
).
CLI: Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Commands
show interfaces brief below
show interface config page 10-8
interface page 10-8
From the CLI, you can configure and view all port parameter settings and view
all port status indicators.
Using the CLI To View Port Status. Use the following commands to dis­
play port status and configuration:
■
show interfaces brief : Lists the full status and configuration for all ports
on the switch.
■
show interface config : Lists a subset of the data shown by the show
interfaces
command (above); that is, only the enabled/disabled, mode, and
flow control status for all ports on the switch.
10-6