background image

Disposing of a used battery

WARNING!

To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short

external contacts; do not dispose of in fire or water.

Refer to the 

Regulatory, Safety, and Environmental Notices

 for battery disposal information.

Replacing the battery

Computer battery life varies, depending on power management settings, programs running on the
computer, display brightness, external devices connected to the computer, and other factors.

You can find details about the battery by clicking the 

Battery

 icon in the notification area, at the far

right of the taskbar, and then click 

Laptop Battery

.

NOTE:

To ensure that you always have battery power when you need it, HP recommends

purchasing a new battery when the storage capacity indicator turns green-yellow.

Using external AC power

NOTE:

For information on connecting to AC power, refer to the 

Setup Instructions

 poster provided

in the computer box.

External AC power is supplied through an approved AC adapter or an optional docking or expansion
device.

WARNING!

To reduce potential safety issues, use only the AC adapter provided with the computer,

a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.

Connect the computer to external AC power under any of the following conditions:

WARNING!

Do not charge the battery while you are onboard aircraft.

When you are charging or calibrating a battery

When you are installing or modifying system software

When writing information to a CD or DVD

When you connect the computer to external AC power, the following events occur:

The battery begins to charge.

If the computer is turned on, the 

Battery

 icon in the notification area changes appearance.

When you disconnect external AC power, the following events occur:

The computer switches to battery power.

The display brightness is automatically decreased to save battery life.

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to
AC power:

The computer does not turn on.

The display does not turn on.

The power lights are off.

42

Chapter 6   Power management

Summary of Contents for ProBook 4445s





































































































Reviews: