HP ProBook 4445s Page 39 User Manual Download

Page: 39 / 100

Scrolling

Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers
slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right
motion.

NOTE:

Scrolling speed is controlled by finger speed.

NOTE:

Two-finger scrolling is enabled at the factory.

Pinching/Zooming

Pinching allows you to zoom in or out on images or text.

●

Zoom in by placing two fingers together on the TouchPad, and then moving them apart.

●

Zoom out by placing two fingers apart on the TouchPad, and then moving them together.

NOTE:

Pinching/zooming is enabled at the factory.

Setting pointing device preferences

To customize settings for button configuration, click speed, pointer options, and so on:

Select

Computer

Control Center

In the left pane, click

Hardware

, and then click

Mouse

in the right pane.

Using the TouchPad

Summary of Contents for ProBook 4445s





































































































Search results

Summary of Contents for ProBook 4445s

Reviews:

Related manuals for ProBook 4445s

Brands by name

Popular brands

HP ProBook 4445s, User Manual

Search results

Summary of Contents for ProBook 4445s

Reviews:

Related manuals for ProBook 4445s

Brands by name

Popular brands