HP ProBook 4445s Page 63 User Manual Download

Page: 63 / 100

External cards and devices

Using Media Card Reader cards (select models only)

Optional digital cards provide secure data storage and convenient data sharing. These cards are
often used with digital cameras and PDAs as well as with other computers.

To determine which digital card formats that are supported on your computer, refer to

Getting to know

your computer on page 3

Inserting a digital card

CAUTION:

To reduce the risk of damage to the digital card connectors, use minimal force to insert

a digital card.

Hold the digital card label-side up, with the connectors facing the computer.

Insert the card into the Media Card Reader, and then push in on the card until it is firmly seated.

Removing a digital card

CAUTION:

To reduce the risk of loss of data or an unresponsive system, use the following

procedure to safely remove the digital card.

Save your information and close all programs associated with the digital card.

To remove a digital card:

Open File Browser by selecting

Computer

Nautilus

In the

Places

list in the left pane of File Browser, click the

Eject

icon next to the name of the

digital card.

NOTE:

You are prompted that it is safe to remove the hardware device.

Using Media Card Reader cards (select models only)

Summary of Contents for ProBook 4445s





































































































Search results

Summary of Contents for ProBook 4445s

Reviews:

Related manuals for ProBook 4445s

Brands by name

Popular brands

HP ProBook 4445s, User Manual

Search results

Summary of Contents for ProBook 4445s

Reviews:

Related manuals for ProBook 4445s

Brands by name

Popular brands