HP ProBook 4435s User Manual Download

Page: 43 / 108

Multimedia

The following sections are included in this chapter:

●

Using the audio features

●

Using the Webcam (select models only)

●

Using video devices

Your computer may include the following:

●

Integrated speakers

●

Integrated microphones

●

Integrated webcam

●

Preinstalled multimedia software

●

Multimedia buttons or keys

Using the audio features

Your computer enables you to use a variety of audio features:

●

Play music.

●

Record sound.

●

Download music from the Internet.

●

Create multimedia presentations.

●

Transmit sound and images with instant messaging programs.

●

Stream radio programs

●

Create (burn) audio CDs using the installed optical drive (select models only) or on an optional
external optical drive (purchased separately).

Using the audio features

Summary of Contents for ProBook 4435s













































































































Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands

HP ProBook 4435s, User Manual

Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands