HP ProBook 4435s User Manual Download

Page: 100 / 108

Cleaning procedures

Follow the procedures in this section to safely clean your notebook or tablet PC.

WARNING!

To prevent electric shock or damage to components, do not attempt to clean your

notebook or tablet PC while it is turned on:

Turn off the notebook or tablet PC.

Disconnect external power.

Disconnect all powered external devices.

CAUTION:

Do not spray cleaning agents or liquids directly on any notebook or tablet PC surface.

Liquids dripped on the surface can permanently damage internal components.

Cleaning the display

Gently wipe the display using a soft, lint-free cloth moistened with an

alcohol-free

glass cleaner. Be

sure that the display is dry before closing the display.

Cleaning the sides and cover

To clean and disinfect the sides and cover, use a soft microfiber cloth or chamois moistened with one
of the cleaning solutions listed in

Cleaning products on page 89

or use an acceptable germicidal

disposable wipe.

NOTE:

When cleaning the cover of the notebook, use a circular motion to aid in removing dirt and

debris.

Cleaning the TouchPad and keyboard

CAUTION:

When cleaning the TouchPad and keyboard, do not let liquids drip between the keys.

This can permanently damage internal components.

●

To clean and disinfect the TouchPad and keyboard, use a soft microfiber cloth or chamois
moistened with one of the cleaning solutions listed in

Cleaning products on page 89

or use an

acceptable germicidal disposable wipe.

●

To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a
can of compressed air with a straw extension.

WARNING!

To reduce the risk of electric shock or damage to internal components, do not use

a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household
debris on the keyboard surface.

Appendix B Cleaning your computer

Summary of Contents for ProBook 4435s













































































































Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands

HP ProBook 4435s, User Manual

Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands