HP ProBook 4435s User Manual Download

Page: 36 / 108

Using the embedded numeric keypad (select models only)

Component

Description

(1)

key

Turns the embedded numeric keypad on and off when pressed in
combination with the

num lk

key.

NOTE:

The embedded numeric keypad will not function while

an external keyboard or numeric keypad is connected to the
computer.

(2)

Embedded numeric keypad

When the keypad is turned on, it can be used like an external
numeric keypad.

Each key on the keypad performs the function indicated by the
icon in the upper-right corner of the key.

(3)

num lk

key

Turns the embedded numeric keypad on and off when pressed in
combination with the

key.

NOTE:

The keypad function that is active when the computer is

turned off is reinstated when the computer is turned back on.

Chapter 4 Keyboard and pointing devices

Summary of Contents for ProBook 4435s













































































































Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands

HP ProBook 4435s, User Manual

Search results

Summary of Contents for ProBook 4435s

Reviews:

Related manuals for ProBook 4435s

Brands by name

Popular brands