HP Pavilion a6600 Configuration Manual Download

Page: 155 / 501

143

# Set the server type for the RADIUS scheme. When using the iMC server, you must set the server type to

extended

[Router-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for
communication with the servers.

[Router-radius-rs1] primary authentication 192.168.0.112

[Router-radius-rs1] primary accounting 192.168.0.112

[Router-radius-rs1] key authentication radius

[Router-radius-rs1] key accounting radius

# Specify that the ISP domain name should not be included in the username sent to the RADIUS server.

[Router-radius-rs1] user-name-format without-domain

[Router-radius-rs1] quit

•

Configure an authentication domain.

# Create an ISP domain named

dm1

and enter its view.

[Router] domain dm1

# Configure AAA methods for the ISP domain.

[Router-isp-dm1] authentication portal radius-scheme rs1

[Router-isp-dm1] authorization portal radius-scheme rs1

[Router-isp-dm1] accounting portal radius-scheme rs1

[Router-isp-dm1] quit

# Configure

dm1

as the default ISP domain for all users. Then, if a user enters a username without any

ISP domain at logon, the authentication and accounting methods of the default domain are used for the

user.

[Router] domain default enable dm1

•

Configure portal authentication.

# Configure the portal server as needed.

[Router] portal server newpt ip 192.168.0.111 key portal port 50100 url

http://192.168.0.111:8080/portal

# Enable portal authentication on the interface connecting the host.

[Router] interface gigabitethernet 1/0/2

[Router–GigabitEthernet1/0/2] portal server newpt method direct

[Router–GigabitEthernet1/0/2] quit

Verification

After the above configuration, execute the following command to see whether the portal configuration

has taken effect:

[Router] display portal interface gigabitethernet 1/0/2

Interface portal configuration:

GigabitEthernet1/0/2: Portal running

Portal server: newpt

Portal backup-group: None

Authentication type: Direct

Authentication domain:

Authentication network:

address : 0.0.0.0 mask : 0.0.0.0

Summary of Contents for Pavilion a6600






















































































































































































































































































































































































































































































































Search results

Summary of Contents for Pavilion a6600

Reviews:

Related manuals for Pavilion a6600

Brands by name

Popular brands

HP Pavilion a6600, Configuration Manual

Search results

Summary of Contents for Pavilion a6600

Reviews:

Related manuals for Pavilion a6600

Brands by name

Popular brands