HP omnibook OBXT1500 Reference Manual Download Page 125

Page: 125 / 156

Troubleshooting and Maintenance

Reinstalling and Updating Software

Reference

Guide

125

5. When the HP logo appears, press Esc to display the Boot menu.

6. Use the arrow keys to select the DVD/CD-RW drive as the boot device, and press

Enter.

7. When the

Recovery CD or DVD

dialog box appears, follow the displayed instructions.

If prompted, accept the recommended partition size. If you install the factory
software, the recovery process can take up to 15 minutes.

If you want to create the Utility partition without installing the factory software, click
Advanced and select not to install the operating system.

If your hard disk is partitioned into several drives, you can install the factory software
on drive C without affecting other drives. Click Advanced and select to restore only
the C partition.

Important:

when prompted to reboot the notebook, press Ctrl+Alt+Del and follow

any instructions that appear.

You can find more details about recovering the factory installation of Windows on the

Recovery CDs or DVDs

: the file readme.txt is in the root directory of each disk.

Note

Windows XP supports the NTFS file system.

To replace damaged

Recovery CDs or DVDs

If you lose or damage the

Recovery CDs or DVDs

, call the HP Customer Care Center for

information about obtaining replacements. See “To contact HP for support or service” on
page 129.

Summary of Contents for omnibook OBXT1500





























































































































































Search results

Summary of Contents for omnibook OBXT1500

Reviews:

HP omnibook OBXT1500, Reference Manual, Page: 125 / 156

Search results

Summary of Contents for omnibook OBXT1500

Reviews: