HP OmniBook 7100 Reference Manual Download Page 12

Page: 12 / 146

Introducing the OmniBook

Taking Inventory

1-4

To buy OmniBook accessories

Buy OmniBook accessories online! For the latest accessories and options, visit us at

http://www.hp.com/omnibook

. As new accessories become available, you’ll find

them listed here.

At the time of this printing, HP offers a variety of docking solutions, plug-in modules,
and other accessories, including the following:

•

Docking system and monitor stand (HP F1477A).

•

Mini dock (HP F1452A).

•

Port replicator (HP F1451A).

•

CD-ROM drive / floppy disk drive (HP F1446A).

•

LS-120 drive (HP F1448A).

•

DVD drive (HP F1447A).

•

Lithium-ion battery (HP F1450A).

You can install a second battery in the module bay.

•

PC Cards.

•

SmartCard.

•

Auto / airline adapter (HP F1455A).

•

OmniBook carrying case.

Summary of Contents for OmniBook 7100



















































































































































Search results

Summary of Contents for OmniBook 7100

Reviews:

Related manuals for OmniBook 7100

Brands by name

Popular brands

HP OmniBook 7100, Reference Manual

Search results

Summary of Contents for OmniBook 7100

Reviews:

Related manuals for OmniBook 7100

Brands by name

Popular brands