HP OmniBook 7100, Reference Manual

Page: 20 / 146

Introducing the OmniBook
Configuring the OmniBook with the BIOS Setup Utility
1-12
System Devices Menu Default
Internal Pointing Devices Enables one or both built-in PS/2 devices. Both
External Fn Key Sets whether left-CTRL + left-ALT on an
external keyboard is interpreted as the Fn key. Enabled
IDE Controller Enables the primary (hard drive) and secondary
(optional CD-ROM drive) controllers. Both
FDD Controller Enables the floppy drive. Enabled
Serial Port Sets how the serial port is configured by the
BIOS (specified or automatic). Enabled
Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4
Infrared Port Sets how the infrared port is configured by the
BIOS (specified or automatic). Disabled
Mode Sets the hardware to support SIR (Standard IR),
ASK IR (amplitude shift keyed IR), or FIR (Fast IR)
infrared communications. (Driver installation
required.) SIR
Base I/O address Sets the I/O address and interrupt. 2F8h, IRQ3
DMA channel For Fast Ir mode, sets the DMA channel. DMA3
Front/Back Sets which infrared port is active. Back
Parallel Port Sets how the parallel port is configured by the
BIOS (specified or automatic). Enabled
Mode Sets the port to normal, bi-directional, EPP, or
ECP. ECP
Base I/O address Sets the I/O address. 378h
Interrupt Sets the interrupt. IRQ7
DMA channel For ECP mode, sets the DMA channel. DMA3
Audio Sets how the audio system is configured by the
BIOS (specified or automatic). Enabled
SB I/O address Sets the Sound Blaster I/O address. 220h
WSS I/O address Sets the Windows Sound System I/O address. 530h
AdLib I/O address Sets the AdLib synthesizer I/O address. 388h