HP OmniBook 7100 Reference Manual Download Page 109

Page: 109 / 146

Using the Recovery CD

Recovering OmniBook Files

6-19

Recovering OmniBook Files

This section describes how to

♦

Install the OmniBook online

User’s Handbook

♦

Recover a damaged

Recovery CD

or hard disk drive.

♦

Update the OmniBook BIOS.

To install the online

User’s Handbook

You can install the online

User’s Handbook

from the

Recovery CD

. This also installs

OmniBook Notes and Support files to your hard drive.

1. Connect the ac adapter to the OmniBook.

2. Install the CD-ROM drive in the OmniBook.

3. Insert the

Recovery CD

in the CD-ROM drive.

4. From the \OmniBook\Hputils\Disk1 directory on the CD, double-click

SETUP.EXE. The OmniBook Application Software Setup screen appears.

5. Click Next.

6. Click “OmniBook Online Documentation.”

7. Click Install Now.

To replace a damaged

Recovery CD

If you lose or damage the

Recovery CD,

take your OmniBook and Certificate of

Authenticity to an HP Service Center to be replaced. If you mail your OmniBook for
this service, you

must

provide a photocopy of the Certificate of Authenticity along

with payment.

Summary of Contents for OmniBook 7100



















































































































































Search results

Summary of Contents for OmniBook 7100

Reviews:

Related manuals for OmniBook 7100

Brands by name

Popular brands

HP OmniBook 7100, Reference Manual

Search results

Summary of Contents for OmniBook 7100

Reviews:

Related manuals for OmniBook 7100

Brands by name

Popular brands