HP J4819A, Installation And Getting Started Manual

Page: 55 / 108

3-9
Getting Started With Switch Configuration
Configuring the ProCurve Access Controller xl Module (J8162A)
Ge
tti
n
g
S
ta
rte
d
With
Sw
itc
h
Co
n
fig
u
ra
tio
n
5300xl Switch Configuration
Configuring the switch consists of assigning switch ports as client downlink
ports and reviewing the uplink VLAN used by the module. The client downlink
ports connect the module to clients, for example, access points. The uplink
VLAN connects the module to the rest of the network and the 740wl/760wl.
By default, it is assigned to the default_VLAN.
To configure client downlink ports, from the CLI command prompt at the
global configuration level
ProCurve Switch 5308xl (config) #
enter
access-controller<slot ID> client-ports <port list>
where
<slot ID>
is the slot letter where the module is installed.
where
<port list>
is the port(s) to be used as client downlink ports.
Each client downlink port is assigned to a separate, automatically created
VLAN.
N o t e
If a port is already assigned to an untagged VLAN, it is reassigned as an
untagged member of the new VLAN. If a port is a tagged member of an existing
VLAN, it joins the new VLAN as an untagged member, while retaining its
previous tagged VLAN membership.
If you receive a message ‘Command will take effect after saving configuration
and reboot.’ use
write memory to save the configuration and reload to reboot
the switch. If you have additional client ports to configure do so now, then
save the configuration and reload the switch.
To change the uplink VLAN from the default_VLAN, enter the configuration
context for the new VLAN at the global configuration level
ProCurve Switch 5308xl (config) # vlan <vid>
assign the module’s uplink to that VLAN as an untagged member
ProCurve Switch 5308xl (config) (vlan <vid>) # untagged <slotID>up
where
<slot ID>
is the slot where the module is installed. For example, if the
module is in slot ‘B’ the command to assign the uplink VLAN to VLAN 3 would
be
ProCurve Switch 5308xl (vlan 3) # untagged bup