HP J4819A, Installation And Getting Started Manual

Page: 31 / 108

2-11
Installing the Switch 5300xl Series
Installation Procedures
In
st
a
lli
n
g
the
S
w
itch
5300xl
Se
ries
Figure 2-3. Installing a power supply
Once the power supply is installed, ensure you tighten the four retaining
screws that hold it in place. The screws can be tightened with either a flat-
bladed or Torx T-10 screwdriver. Be careful not to overtighten the screws.
Figure 2-4. Tighting the power supply retaining screws
Insert the power supply into the
opening, then slide it all the way
in until it connects to the switch.
The power supply face plate will
be flush with the back face of the
switch.
tighten the
four screws