10. Remove the right access panel.
See
“Removing the Right Access Panel” (page 116)
.
11. Remove the SAS backplane and cable.
See
“Removing the SAS Backplane” (page 129)
.
12. Remove the front panel. See
“Removing the Front Panel” (page 130)
.
13. Remove the processors.
See
“Removing a Processor” (page 125)
.
14. Remove the processor MVR cable by unplugging it from the system board.
15. Remove the mezzanine cards.
See
“Removing a Mezzanine Card” (page 134)
.
16. Remove the TPM (if necessary).
See
“Removing the TPM” (page 136)
.
17. Remove the three air baffles by pulling them straight up and out of the server blade.
The air baffles are shown in
Figure 64
.
Figure 64 Air Baffles
3
2
1
MLB air baffle – middle
Chassis plug
MLB air baffle – left
18. Loosen the four captive thumbscrews located on the system board.
For the thumbscrew locations, see
Figure 65 (page 140)
.
Removing and Replacing the System Board
139
