manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

Removal and replacement procedures

4–34

16. If it is necessary to replace the webcam/microphone module, remove the Phillips PM2.0×4.0 screw 

1

 that 

secures the module to the display bezel.

17. Release the webcam/microphone module 

2

 as far from the display bezel as the webcam/microphone module 

cable allows.

18. Disconnect the webcam/microphone module cable 

3

 from the webcam/microphone module, and remove the 

webcam/microphone module. The webcam/microphone module is available using spare part number 
499242-001.

19. If it is necessary to replace the display hinge cover, display inverter, or webcam/microphone module cable, 

remove the four Phillips PM2.0×4.0 screws 

1

 that secure the display hinge cover to the display bezel.

20. Remove the display hinge cover 

2

 from the display bezel. The display hinge cover is available using spare part 

number 496875-001.

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Akai GX-625 Operator'S Manual preview
GX-625
Brand: Akai Pages: 21
V-TEK TM-402 User Manual preview
TM-402
Brand: V-TEK Pages: 298

Brands by name

Popular brands

Load more brands