manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

External component identification

2–7

Front components

Right-side components

Item

Component

Function

1

Digital Media Slot

Supports the following optional digital card formats:

■

Memory Stick (MS)

■

Memory Stick Pro (MSP)

■

MultiMediaCard (MMC)

■

Secure Digital (SD) Memory Card

■

xD-Picture Card (XD)

2

Digital Media Slot light

On: A digital card is being accessed.

3

Consumer infrared lens

Receives a signal from the HP Remote Control (select models only).

Item

Component

Function

1

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array 
microphone, or monaural microphone.

2

Audio-out (headphone) jacks (2)

Produce sound when connected to optional powered stereo speakers, 
headphones, ear buds, headsets, or television audio.

3

USB ports (2)

Connect optional USB devices.

4

Optical drive

Reads optical discs and, on select models, also writes to optical discs.

5

Optical drive light

Blinking: The optical drive is being accessed.

6

TV antenna/cable jack (select 
models only)

Connects an optional TV antenna or an optional digital cable device that 
receives standard or high-definition TV broadcasts.

7

Power connector

Connects an AC adapter.

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Brands by name

Popular brands

Load more brands