manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

Product description

1–3

Audio

High-definition audio
Integrated subwoofer

Supports Microsoft® premium requirements

2 Altec Lansing Pavilion-branded speakers

Webcam

Low-light VGA camera
Fixed (no tilt)

Activity LED 640 × 480 by 30

24 frames per second

Modem

56K V.92 1.5-inch data/fax modem with digital line guard

Modem cable is not included

Ethernet

Intel Realtek 8111C 10/100/1000 network interface card (NIC)
Intel Realtek 8102E 10/100 NIC

Ethernet cable included

Wireless

Integrated WLAN options by way of wireless module:

2 wireless antennae built into display assembly

Supports no-WLAN option

Support for the following WLAN formats:

■

Intel WiFi Link 5100 802.11a/b/g/n

■

Intel WiFi Link 5100 802.11a/b/g/n with Bluetooth®

■

Intel WiFi Link 5100 802.11a/b/g

■

Intel WiFi Link 5100 802.11a/b/g with Bluetooth

■

Atheros 802.11a/b/g/n

■

Atheros 802.11a/b/g/n with Bluetooth

TV tuner

DVB-T TV tuner module
DVB-T/ANG TV tuner module

NTSC/ATSC/ANG TV tuner module

TV tuner antennae with F-PAL and PAL jacks

External media cards

One ExpressCard slot, supporting optional ExpressCard/54 cards

Digital Media Slot supporting Memory Stick (MS), Memory Stick Pro (MSP), MultiMediaCard 
(MMC), Secure Digital (SD) Memory Card, and xD-Picture Card (XD)

(Continued)

Category

Description

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Brands by name

Popular brands

Load more brands