manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

External component identification

2–8

Left-side components

Rear component

Item

Component

Function

1

Security cable slot

Attaches an optional security cable to the computer.

✎

The security cable is designed to act as a deterrent, but it may not 
prevent the computer from being mishandled or stolen.

2

External monitor port

Connects an external VGA monitor or projector.

3

Expansion port 3

Connects the computer to an optional docking device or optional expansion 
product.

✎

The computer has only one expansion port. The term expansion port 
3 describes the type of expansion port.

4

RJ-45 (network) jack

Connects a network cable.

5

HDMI port

Connects an optional video or audio device, such as a high-definition 
television, or any compatible digital or audio component.

6

eSATA/USB port

Connects an optional high-performance eSATA component, such as an 
eSATA external hard drive, or connects an optional USB device.

7

USB port

Connects an optional USB device.

8

1394 port

Connects an optional IEEE 1394 or 1394a device, such as a camcorder.

9

ExpressCard slot

Supports optional ExpressCards.

Component

Function

Vent

Enables airflow to cool internal components.

✎

The computer fan starts up automatically to cool internal components 
and prevent overheating. It is normal for the internal fan to cycle on and 
off during routine operation.

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Brands by name

Popular brands

Load more brands