manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

External component identification

2–1

2

External component identification

Top components

Display components

Item

Component

Description

1

Internal display switch

Turns off the display if the display is closed while the computer is on.

2

Wireless antennae (2)

Send and receive wireless signals to communicate with WLANs.

✎

The antennae are not visible from the outside of the computer. 
For optimal transmission, keep the areas immediately around the 
antennae free from obstructions.

3

Internal digital dual-array 
microphones (2)

Record sound.

4

Webcam light

On: The webcam is in use.

5

Webcam

Records audio and video and captures still photographs.

✎

To see wireless regulatory notices, refer to the section of the 

Regulatory, Safety and Environmental Notices that applies 

to your country or region. These notices are located in Help and Support.

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Brands by name

Popular brands

Load more brands