manualshive.com logo in svg

HP HDX 18, Maintenance And Service Manual

The HP HDX 18 is a high-quality multimedia laptop with impressive specifications. To fully enjoy and utilize its features, a comprehensive user manual is essential. Download the free manual from our website, manualshive.com, to uncover all the capabilities of this exceptional device.

Share
Download
background image

Removal and replacement procedures

4–24

Keyboard

Before removing the keyboard, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 

and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 

unplugging the AC adapter from the computer.

4. Remove the battery (see 

“Battery” on page 4-8

).

5. Remove the switch cover (see 

“Switch cover” on page 4-18

).

6. Remove the keyboard cover (see 

“Keyboard cover” on page 4-20

).

Description

Spare part number 

For use in Belgium

496878-A41

For use in Brazil

496878-201

For use in the Czech Republic

496878-221

For use in Denmark, Finland, and Norway

509474DH1

For use in France

496878-051

For use in French Canada

509474121

For use in Germany

496878-041

For use in Greece

496878-DJ1

For use in Italy

496878-061

For use in Japan

509474291

For use in Latin America

496878-161

For use in the Netherlands

496878-B31

For use in Portugal

496878-131

For use in Russia

496878-251

For use in Saudi Arabia

509474-171

For use in South Korea

509474-AD1

For use in Spain

496878-071

For use in Switzerland

496878-111

For use in Taiwan

496878-AB1

For use in Thailand

509474-281

For use in Turkey

496878-141

For use in the United Kingdom

496878-031

For use in the United States

496878-001

Summary of Contents for HDX 18











































































































































Reviews:

No comments

Related manuals for HDX 18

Brands by name

Popular brands

Load more brands