manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 427

Glossary

Guardian User’s Guide — 425266-001

Glossary -11

Pathway/TS

Pathway/TS. A Compaq product that provides tools for developing and interpreting screen 

programs to support OLTP applications in the Guardian operating environment. 

PEEK. A utility program that reports statistical information concerning processor activity for 

system storage pools, paging activity, send instructions, and interrupt conditions.

Peruse. A spooler utility that allows users to control and monitor print jobs.

performance management. Activities that manage the performance of the production 

system and network environment to ensure that the systems meet the business needs 
defined by operations service-level agreements. One of the operations disciplines in the 
operations management model. See 

operations management model (OM model).

peripheral device. Any device used by processors to communicate with users or to acquire 

or store data. Peripheral devices include terminals, printers, workstations, disk drives, 
and tape drives.

physical interface (PIF). The hardware components that connect a system node to a 

network.

physical outage class. An outage class that includes physical faults or failure in the 

hardware. Any type of hardware-component failure belongs in this category. See 

outage 

class.

PIF. See 

physical interface (PIF)

.

PIN. See 

performance management.

.

planned outage. Time during which the system is not capable of doing useful work because 

of a planned interruption. A planned outage can be time when the system is brought 
down to allow for servicing, upgrades, backup, or general maintenance. Contrast with 
unplanned outage. 

POET. See 

Pathway Open Environment Toolkit (POET).

primary processor. The processor that is designated at system generation time as “owning” 

the controller connected to the two separate processors of a NonStop™ Kernel operating 
system. The primary processor is the processor that has direct control over the 
controller. See 

backup processor

.

printing distributor. An EMS distributor process that sends operator messages to printers, 

devices, processes, or files.

problem management. Activities that provide support for resolving problems in a 

production environment. One of the operations disciplines in the operations 
management model. See 

operations management model (OM model).

 

process identification number (PIN). An integer that identifies a process in a particular 

processor and can range from 0 to an architectural limit of 65534.

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands