manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 420

Glossary

Guardian User’s Guide — 425266-001

Glossary -4

disk

disk. A physical disk pack mounted on a disk drive. Because they are electromechanical 

devices, disks are more subject to hardware faults and media errors than other system 
components and should therefore be monitored frequently. See also 

volume

.

Disk Compression Program (DCOM). A utility program that compresses disk space.

Disk Space Analysis Program (DSAP). A utility program that analyzes displays how space 

is used on a given disk volume.

Distributed Systems Management (DSM) products. A set of software tools that facilitate 

management of NonStop™ Kernel systems and Expand networks. These tools include 
the Distributed Name Service (DNS), the Event Management Service (EMS), the 
Subsystem Control Facility (SCF) for a variety of subsystems, and the Subsystem 
Programmatic Interface (SPI).

distributor process. An EMS process that distributes event messages from event logs to 

requesting management applications, to another collector on this or another node, or to 
printers, devices, or files. EMS provides the following distributor processes for handling 
event messages: consumer, forwarding, printing, and compatibility.

DSAP. See 

Disk Space Analysis Program (DSAP).

DSM. See 

Distributed Systems Management (DSM) products.

E1SA. See 

Ethernet 1 ServerNet adapter (E1SA)

.

EMS. See 

Event Management Service (EMS).

EMSA. See 

Event Management Service Analyzer (EMSA).

Error. A utility program that displays the error message associated with a file-system error 

number.

Ethernet. A local area network that uses the CSMA/CD (carrier sense multiple access with 

collision detection) access method on a bus topology and is the basis for the IEEE 802.3 
standard.

Ethernet 1 ServerNet adapter (E1SA). A ServerNet adapter for Ethernet local area network 

(LAN) that contains one Ethernet port.

event. A change in some condition in the system or network, whether minor or serious. 

Events might be operational errors, notifications of limits exceeded, requests for action, 
and so on.

event log. A file or set of files maintained by EMS to store event messages generated by 

various subsystems.

Event Management Service (EMS). The processes, procedures, and utilities used to report 

and log events; to forward, print, and distribute event messages to applications; and to 
filter, retrieve, and obtain information from event messages.

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands