manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 423

Glossary

Guardian User’s Guide — 425266-001

Glossary -7

LAN

LAN. See 

local-area network (LAN)

.

line. The specific hardware path over which data is transmitted or received. A line can also 

have a process name associated with it that identifies an input/output process (IOP) or 
logical device associated with that specific hardware path.

local-area network (LAN). A network that is located in a small geographical area and whose 

communications technology provides a high-bandwidth, low-cost medium to which low-
cost nodes can be connected. One or more LANs can be connected to the system such 
that the LAN users can access the system as if their workstations were connected 
directly to it. Contrast with “wide area network (WAN).”

licensed program. A program that has the privileges of the operating system. When a 

licensed program runs, privileged operations in it can bypass ordinary security 
interfaces.

LIF. See 

logical interface (LIF)

.

logical device. A process used to communicate with a physical device. Logical devices are 

identified by names and numbers; for example, $DISK1.

logical interface (LIF). A process that allows an application or another process to 

communicate with data communications hardware.

low PIN. A process identification number (PIN) that can range from 0 through 254. See also 

high PIN

.

macro. A sequence of TACL commands and built-in functions that can contain dummy 

arguments, thus providing a means for simple argument substitution. When the macro 
name is given to TACL, TACL substitutes the command sequence for the macro name 
and replaces any dummy arguments with parameter values supplied to TACL. Macros 
are used to automate operations tasks.

management application. A program or set of programs that issues commands to 

subsystems, retrieves event messages, or does both things, to assist in managing a 
system or a network of systems.

Measure. A performance-measurement tool that lets users collect and examine statistics for a 

system or network.

MEDIACOM. The operator interface to the Distributed Systems Management/Tape Catalog 

(DSM/TC) product and to the STK 4400 Automated Cartridge System (ACS). It can be 
used in environments other than DSM/TC. Refer to the DSM/Tape Catalog Operator 
Interface (MEDIACOM) Manual for complete documentation on this utility.

mirrored volume. See 

volume

.

network. Two or more computer systems (nodes) connected so that they can exchange 

information and share resources. 

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands