manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 369

Guardian User’s Guide — 425266-001

18- 1

18

Displaying Version and System 
Information

This section describes two utilities, VPROC and SYSINFO, which you can use to find 
information about your system and its software.

VPROC is a utility that uniquely identifies and displays product version information for 
one or more files. SYSINFO displays basic information about a local or remote system. 
If you are reporting a problem or asking for product or system support, you need to run 
VPROC or SYSINFO so you can supply Compaq with the correct system information or 
product versions for the product files.

This section contains:

Displaying File Version Information

Task 1: Find Product Files

There can be many files for a product in different locations on a system; you want the 
one that is actively used. Product files are located in both the Guardian and Open 
System Services (OSS) environments. VPROC can be run from both environments, so 
the procedure you need to perform depends upon the environment you are using and 
where the product files are located.

In the Guardian Environment

The following procedure finds the version of a product’s object file that you use because 
of the values in your PMSEARCHLIST TACL variable. Other users might use other 
versions of the file.

To find the correct object file for a Guardian product, work in the Guardian 
environment:

1. Start the product from a TACL prompt. Use the NOWAIT run option in 

combination with the NAME run option so you can start a process but stay in the 
TACL program.

2. Use the STATUS command to identify the location of the object file that your 

system referred to when it started the named process.

3. Use the STOP command to stop the process (unless you intend to use it).

Topic

Page

Displaying File Version Information

18-1

Displaying System Information

18-9

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands