manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 190

Using Labeled Tapes

Guardian User’s Guide — 425266-001

10 -16

Responding to Messages and Requests

Responding to Tape Process Messages

Tape processes perform many functions, including reading the labels on mounted tapes 
and sending that information to $ZSVR. If a tape process encounters any problems 
while reading the label information on a mounted tape, it sends an error message or a 
warning message to the operator console.

A tape process can generate a message as a result of many conditions, including:

•

A tape that is mounted on a drive has an incorrect or unexpected label.

•

A tape is mounted that is incompatible with a tape process request. For example, an 
unlabeled tape is mounted in response to a labeled-tape request.

•

A tape is mounted on a drive with manual density selection set to a density 
incompatible with the data on the tape.

•

A tape is bad.

Tape process messages are displayed in the format:

$tape

is the tape device that is reporting the error.

number

is the error number: 0001–0499 are tape process error messages, and 0901–0999 are 
tape process warning messages.

text

describes the error situation, containing any applicable volume serial numbers.

Example: Tape Process Warning Message

What to Do if $ZSVR Abends

If $ZSVR terminates because of a fatal internal error, it automatically generates a 
SAVEABEND file. This file contains information about what was occurring at the time 
of failure and can help your management staff analyze the problem. 

If the $ZSVR process terminates because of a fatal internal error:

1. Make a copy of the SAVEABEND file using the FUP DUP command. 

$tape : { ERROR | WARNING } number - text

93-09-04 10:30:57 \SAGE.$ZSVR       TANDEM.TAPE.D20      000654 $TAPE: WARNING 
                                    904 - VOLUME ABC001 DENSITY CHANGED TO 1600
                                    FROM 6250 

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands