manualshive.com logo in svg

HP Guardian, User Manual

Share
Download
HP Guardian User Manual Download Page 218

Backing Up and Restoring Disk Information

Guardian User’s Guide — 425266-001

11 -12

Restoring Your Files

Restoring Your Files

Use Restore to copy backed up files from a backup tape to a disk. Restore contains many 
options that let you customize your restore operations, including:

•

Copy files to disk from a magnetic tape created using Backup

•

List the contents of a tape without restoring data

•

Convert files from one disk process type to another

For more information about tape operations, see 

Section 10, Using Labeled Tapes

.

 This example restores all files on tape drive $TAPE1 that have the current default 
volume and subvolume name and all files that have the volume and subvolume name 
$DATA.USER.

To restore files from a backup tape to your disk using file-mode operation:

1. Remove the write-ring from the tape reel that you are using for the restore operation. 

This write-protects your tape; if your tape is write-enabled and another process 
attempts to write to your tape, your data can be damaged or destroyed. 

2. Enter a Restore command at the TACL prompt: 

run-options      

One or more run options. See the RUN command in the TACL Reference Manual.

tape-drive   

Name of the tape drive you are using for the restore operation, or a TAPE DEFINE 
name. Tape drive names begin with a dollar sign ($) and can be up to seven 
characters long.

qualified-file-set-list     

One or more file-set lists specifying the files you want to restore.

command-option     

Restore command option. See 

Table 11-3

 on page 11-14.

This example shows a Restore command:        

Note. Do not run Restore under a user ID with Safeguard default protection, because all files 
restored to disk would also have Safeguard protection.

RESTORE [ / run-options / ] tape-drive, 
qualified-file-set-list 
[ , command-option ]
[ , command-option ]...

10> RESTORE /OUT LIST, NOWAIT/ $TAPE1, & (*, $DATA.USER.*), LISTALL 

Summary of Contents for Guardian













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands