HP EliteBook 630 Maintenance And Service Manual Download

Page: 80 / 103

HP recommends that you attempt to restore your system using the

Restoring and recovery methods on page

Creating a system restore

System Restore is available in Windows. The System Restore software can automatically or manually create

restore points, or snapshots, of the system files and settings on the computer at a particular point.

When you use System Restore, it returns your computer to its state at the time you made the restore point.

Your personal files and documents should not be affected.

Restoring and recovery methods

After you run the first method, test to see whether the issue still exists before you proceed to the next

method, which might now be unnecessary.

Run a Microsoft System Restore.

Run Reset this PC.

NOTE:

The options Remove everything and then Fully clean the drive can take several hours to

complete and leave no information on your computer. It is the safest way to reset your computer before

you recycle it.

Recover using HP Recovery media. For more information, see

Recovering using HP Recovery media on

page 72

For more information about the first two methods, see the Get Help app:

Select the Start button, select All apps (select products only), select the Get Help app, and then enter the task

you want to perform.

NOTE:

You must be connected to the internet to access the Get Help app.

Recovering using HP Recovery media

You can use HP Recovery media to recover the original operating system and software programs that were

installed at the factory. On select products, it can be created on a bootable USB flash drive using the HP Cloud

Recovery Download Tool.

For details, see

Using the HP Cloud Recovery Download Tool to create recovery media (select products only) on

page 71

NOTE:

If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to

http://www.hp.com/support

, select your country or region, and then follow the on-screen instructions.

To recover your system:

▲

Insert the HP Recovery media, and then restart the computer.

NOTE:

HP recommends that you follow the

Restoring and recovery methods on page 72

to restore your

computer before you obtain and use the HP recovery discs. Using a recent backup can return your machine to

a working state sooner than using the HP recovery discs. After the system is restored, reinstalling all the

operating system software released since your initial purchase can be a lengthy process.

Chapter 8 Backing up, restoring, and recovering

Summary of Contents for EliteBook 630








































































































Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands

HP EliteBook 630, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands