Table 6-6
Fingerprint reader board description and part number (continued)
Description
Spare part number
Fingerprint reader insert (for use in models without a fingerprint reader)
N00113-001
Before removing the fingerprint reader board, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 37
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fingerprint reader board:
1.
Disconnect the cable from the ZIF connector on the fingerprint reader board (1).
2.
Remove the Phillips M2.0 × 2.5 screw (2) that secures the fingerprint reader bracket to the computer, and
then remove the bracket (3).
3.
Remove the fingerprint reader board from the computer (4).
Reverse this procedure to install the fingerprint reader board.
Fan
To remove the fan, use this procedure and illustration.
Table 6-7
Fan description and part number
Description
Spare part number
Fan
N09818-001
50
Chapter 6 Removal and replacement procedures for authorized service provider parts