HP EliteBook 630 Maintenance And Service Manual Download

Page: 79 / 103

Backing up, restoring, and recovering

You can use Windows tools or HP software to back up your information, create a restore point, reset your

computer, create recovery media, or restore your computer to its factory state. Performing these standard

procedures can return your computer to a working state faster.

IMPORTANT:

If you will be performing recovery procedures on a tablet, the tablet battery must be at least

70% charged before you start the recovery process.

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before

beginning any recovery process.

Backing up information and creating recovery media

These methods of creating recovery media and backups are available on select products only.

Using Windows tools for backing up

HP recommends that you back up your information immediately after initial setup. You can do this task either

using Windows Backup locally with an external USB drive or using online tools.

IMPORTANT:

Windows is the only option that allows you to back up your personal information. Schedule

regular backups to avoid information loss.

NOTE:

If computer storage is 32 GB or less, Microsoft® System Restore is disabled by default.

Using the HP Cloud Recovery Download Tool to create recovery media (select products

only)

You can use the HP Cloud Recovery Download Tool to create HP Recovery media on a bootable USB flash drive.

For details:

▲

Go to

http://www.hp.com

, search for HP Cloud Recovery, and then select the result that matches the

type of computer that you have.

NOTE:

If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to

http://www.hp.com/support

, select your country or region, and then follow the on-screen instructions.

IMPORTANT:

HP recommends that you follow the

Restoring and recovery methods on page 72

to restore

your computer before you obtain and use the HP recovery discs. Using a recent backup can return your

machine to a working state sooner than using the HP recovery discs. After the system is restored,

reinstalling all the operating system software released since your initial purchase can be a lengthy process.

Restoring and recovering your system

You have several tools available to recover your system both within and outside of Windows if the desktop

cannot load.

Backing up, restoring, and recovering

Summary of Contents for EliteBook 630








































































































Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands

HP EliteBook 630, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands