HP eld Page 151 Manual Download | Manualshive

Page: 151 / 283

background image

Output Listings and Error Handling

eld Manual—527255-009

6-41

Error Messages

eld

will print out informational messages about all the DLLs that it used if you supply

the -verbose option. A symbol in a DLL also needs to be exported from that DLL for

eld

to find it. A symbol might also be a member of an archive, but the archive needs

to come later on the command line than the reference to the symbol to guarantee that

eld

finds the symbol in the archive. Depending on the situation, you may be able to

use the

-unres_symbols

option to specify whether

eld

should consider unresolved

references to be errors, warnings, or neither.

Cause.

You used the -y option, to ask

eld

to provide information about the symbol

mentioned in the message, and

eld

is telling you that there is a reference to that

symbol in the indicated file.

Effect.

Information (This is not indicative of a problem).

Recovery.

No action required.

Cause.

You used the -y option, to ask

eld

to provide information about the symbol

mentioned in the message, and

eld

is telling you that there is a definition of that

symbol in the indicated file.

Effect.

Information (This is not indicative of a problem).

Recovery.

No action required.

Cause.

Procedures are contained within code “sections”. The C++ compiler may

create duplicate copies of procedures, and

eld

can remove the duplicates if the

compiler gives permission. When this is done, the entire section containing the

unneeded copy of the procedure is removed. There may be references to the

procedure, but those references should be done by giving the name of the procedure,

and they will be fixed up to another copy of the procedure that was not removed. It is

also possible to make references to something within a code section by telling, not the

name of a symbol, but rather the name of the section and the offset within the section.

If there are such references into a section, the C++ compiler should not give

eld

permission to remove it, because there would be no way to fix up the references. That

is what has happened. The message tells what input file this happened in, and where

1266 <filename>: reference to <symbol name>.

1267 <filename>: definition of <symbol name>.

1273 Bad input file: relocation table entry <number> for the
<section name> section of input file <filename> is a local
reference to the <section name> section. That is an error
because the <section name> section has been omitted from the
link, since it only contains an unneeded duplicate copy of a
procedure.

«
...
149
150
151
152
153
...
»

Summary of Contents for eld




























































































































































































































































































Reviews:

No comments

Related manuals for eld

PowerShot SD10 Digital ELPH

Brand: Canon Pages: 124

Brand: UMAX Technologies Pages: 10

Brand: Teklynx Pages: 30

Certificate Management System 6.2

Brand: Netscape Pages: 874

Brand: Siemens Pages: 11

Brand: Siemens Pages: 28

Brand: Siemens Pages: 32

OpenScape Xpressions PhoneMail

Brand: Siemens Pages: 110

APPLICATION STACK 2.0 RELEASE

Brand: Red Hat Pages: 26

NETWORK SATELLITE SERVER 4.0

Brand: Red Hat Pages: 80

NETWORK - USER REFERENCE GUIDE 3.1

Brand: Red Hat Pages: 78

NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Brand: Red Hat Pages: 300

Brand: Vonamic Pages: 30

Brand: Access Pages: 16

Active Management Technology v5.0

Brand: Intel Pages: 143

MOBILE SECURITY 3.1 FOR S60

Brand: F-SECURE Pages: 31

Brand: VERITEQ Pages: 112

Brand: MACROMEDIA Pages: 678

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands