HP eld Manual Download Page 172

Page: 172 / 283

Output Listings and Error Handling

eld Manual—527255-009

6-62

Error Messages

Recovery.

This indicates some problem with the procedure for building and installing

the NSK operating system, which is beyond the scope of this document.

Cause.

The -verbose, -warn, and -no_verbose options are mutually exclusive, and you

specified more than one of them. You can specify the same one of these options more

than once if you wish, but you cannot specify different ones as part of the same

eld

invocation.

Effect.

Error (The linker cannot do what was requested of it and will eventually stop,

but may continue for the purpose of detecting additional errors before stopping).

Recovery.

These options tell

eld

which messages you want to see, other than error

messages, which you cannot turn off. Decide which option you want and only specify

that one.

Cause.

You specified the -check_registry or -update_registry option, to tell

eld

to use

a private DLL registry. Such a file did exist, and the first thing that

eld

tried to do with

it was to open the file for reading. However,

eld

could not do that, because the file

was being used exclusively by another process, perhaps by another link that was using

the -update_registry option. In this situation,

eld

waits and tries again, and that

should work. If that doesn’t work after a certain number of tries, then

eld

gives up,

resulting in this message.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Look into the status of the file that you specified. Perhaps someone has it

opened for an extended period of time in an editing session. Run

eld

again when it is

possible for

eld

to read that file.

Cause.

You gave the -o option more than once on the command line, specifying

different filenames. You can give this option more than once, but only if you specify the

same filename each time.

Effect.

Error (The linker cannot do what was requested of it and will eventually stop,

but may continue for the purpose of detecting additional errors before stopping).

Recovery.

This option tells the name for the main object file that

eld

is creating

Decide what name you want, and specify just that name on the command line. Also

note that, if you misspell some other option beginning with an “o”, then

eld

will

interpret that as a “-o” option, possibly leading to this message. The only other valid

1351 Conflicting verbosity options: <string> and <string>.

1353 DLL registry <filename> is in use. Giving up.

1355 Multiple specifications of the -o option with different
filenames.

Summary of Contents for eld




























































































































































































































































































Search results

Summary of Contents for eld

Reviews:

HP eld, Manual, Page: 172 / 283

Search results

Summary of Contents for eld

Reviews: