HP eld Page 112 Manual Download

Page: 112 / 283

Output Listings and Error Handling

eld Manual—527255-009

6-2

General Information

Normally,

eld

cleans up any output files and flushes the standard output file.

However, if

eld

terminates unexpectedly, incomplete output files may still be in

existence and the standard output file may not be flushed.
It is also possible for the standard output file to disappear while

eld

is running. For

example, this could happen on Guardian if the standard output file is a process, and

that process is killed while

eld

is running. In that case,

eld

still goes on with what it

was doing, producing the same return code as described above, to tell if the output file

could be correctly created. The only difference is that there is no standard output file.
Versions of

eld

running on TNS/R and TNS/E are built (by the corresponding TNS/R

or TNS/E tools) with

-set saveabend off,

so by default these versions of

eld

not generate a saveabend file if they terminate in error. You may use the normal HP

NonStop OS command line mechanisms to request that

eld

generate a saveabend file

if it terminates in error.
Messages are numbered and tell their severity level. Messages can be understood in

conjunction with the other material in this document, including the following section that

lists the messages. It is not intended that people depend on the specific numbers or

contents of messages, since they are always subject to change. Messages related to

I/O errors contain the message text for the error returned from the C runtime.
Some messages are requested by specific linker options. Such messages always

appear in the output listing. The following are the options that do this:

-map
-show_multiple_defs
-unres_symbols (warn or error)
-y

The appearance of other messages in the output listing is controlled by the following

options:

-verbose

show all messages (error, warning, and informational)

-warn

show all error and warning messages (but not informational messages)

-no_verbose

show error messages (but not warnings or informational messages)

It is an error if more than one of these options is specified. Since all messages created

eld

during command stream processing are errors, there is no need for a toggle.

If none of the above options is given, the default is

-no_verbose

on OSS and the

PC, and

verbose

on Guardian.

The option -

noverbose

is a synonym for -

no_verbose

Summary of Contents for eld




























































































































































































































































































Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands

HP eld, Manual

Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands