HP eld Page 85 Manual Download

Page: 85 / 283

Other eld Processing

eld Manual—527255-009

4-7

Additional rules about -alf

•

GP-relative addressing from the gateways to the text segment, specifically, when

the gateway contains the 64-bit GP-relative address of the procedure for which it is

the gateway.

The way that the

-alf

option updates all the items listed above depends on the type

of item:

•

If the target of the reference is identified by name,

-alf

updates the reference

based on that name.

•

If the reference site is one that is filled in by the linker, and

-alf

only knows that it

needs to be updated by the amount that this DLL was rebased,

-alf

determines

which segment previously contained the target of the reference and then updates

the reference site by the amount that that segment moved.

eld

reports an error if the existing file cannot be opened for reading. It is possible to

specify the

-o

option to tell the name of the new output file. If the

-o option

is not

specified then it defaults to the same name as the existing loadfile. Even if the existing

file is a DLL, its DLL name does not influence the output file name. The output file is

created by the same method as described in

The Creation of Output Object Files

page 2-5, including the use of the

-temp_o

option or the

-must_use_oname

option.

Here is a complete list of the user options that are allowed with the

-alf

option:

-allow_missing_libs
-first_L
-L
-local_libname
-must_use_oname
-must_preset
-no_preset
-no_verbose
-no_version_check
-nostdlib
-o
-obey
-public_registry
-rld_first_L
-rld_L
-stdin
-t -temp_o
-unres_symbols
-verbose
-warn

For further information on

-alf

see

Appendix , How -alf Updates DWARF

for a

discussion of the debug.reloc section of the object file.

Summary of Contents for eld




























































































































































































































































































Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands

HP eld, Manual

Search results

Summary of Contents for eld

Reviews:

Related manuals for eld

Brands by name

Popular brands